The flow over delta wings at low speeds with leading edge separation

A low speed investigation of the flow over a 40 degree apex angle delta wing with sharp leading edges had been made in order to ascertain details of the flow in the viscous region near the leading edge of the suction surface of the wing. A physical picture of the flow was obtained from the surface flow and a smoke technique of flow visualization, combined with detailed measurements of total head, dynamic pressure, flow directions and vortex core positions in the flow above the wing

Remote Predictive Mapping 4. Utilizing High Resolution Satellite Imagery, Western Minto Inlier, Victoria Island, NWT

The very high spatial resolution and stereo capability of GeoEye-1 images were utilized to map the geology of a part of the western Neoproterozoic Minto Inlier on Victoria Island. To optimize the results of predictive mapping, a LANDSAT-7 image together with a SPOT-5 image were also used in concert with the GeoEye-1 images. The predictive bedrock geology map, interpreted based on 3D stereo visualization, presents much more detailed geological information compared to the existing 1:500,000 scale geological map of the area. The high spatial and moderate spectral resolution of GeoEye images allowed us to distinguish a black shale unit (black shale member), and resolve subtle spectral and textural differences between massive stromatolitic dolostone and dolostone containing fine-grained interlayers in an upper carbonate member. As well, an important distinction could be made between Proterozoic sedimentary strata and unconformably overlying interlayered sandstone and carbonate rocks of Cambro-Ordovician age. The SWIR bands in the LANDSAT and SPOT images proved to be very useful in identifying gabbro sills. A geological map, based on field work, was used to evaluate the remote predictive map. Comparison of the predictive map with the field map shows that the two maps look similar in terms of the regional distribution of the lithological units; however, there are discrepancies between the two maps, especially in areas in which the bedrock is covered by glacial sediments and/or other overburden materials. The spectral similarity between different stratigraphic units comprising similar rock types, also contributed to differences between the predictive map and the field map.Nous avons utilisé la très haute résolution spatiale et les capacités stéréoscopiques des images GeoEye-1 pour cartographier la géologie d’une partie de la partie ouest de l’enclave de Minto, datant du Néoprotérozoïque, de l’île Victoria. Pour optimiser les résultats de la cartographie prédictive, nous avons aussi utilisé une image LANDSAT-7 et une image SPOT-5 avec les images GeoEye-1. Les cartes géologiques prédictives du substratum rocheux, interprétées à partir d’une visualisation stéréoscopique 3D, présentent des renseignements géologiques beaucoup plus détaillés que la carte géologique actuelle de cette zone à l’échelle de 1/500 000. La haute résolution spatiale et la résolution spectrale modérée des images GeoEye nous ont permis de distinguer une unité d’ampélite (membre d’ampélite) et de résoudre des différences spectrales et texturales subtiles entre la dolomie stromatolithique massive et la dolomie contenant des interstrates à grain fin dans un membre carbonaté supérieur. De plus, nous avons pu faire une distinction importante entre les strates sédimentaires du Protérozoïque et les couches interstratifiées de roches carbonatées et de grès du Cambro-Ordovicien qui les surmontent en discordance. Les bandes IRCL des images des satellites LANDSAT et SPOT ont été très utiles pour identifier les filons-couches de gabbro. Une carte géologique basée sur des travaux réalisés sur le terrain a servi à évaluer la carte de télécartographie prédictive. Une comparaison de la carte prédictive et de la carte dressée sur le terrain montre que les deux cartes semblent similaires en ce qui a trait à la répartition régionale des unités lithologiques; mais il y a des différences, surtout aux endroits où le substratum rocheux est couvert de sédiments glaciaires et/ou d’autres matériaux de recouvrement. La similitude spectrale entre les différentes unités stratigraphiques ayant des lithologies similaires a aussi contribué à causer des différences entre la carte prédictive et la carte dressée sur le terrain

A Comparison of Different Remotely Sensed Data for Classifying Bedrock Types in Canada’s Arctic: Application of the Robust Classification Method and Random Forests

The Geological Survey of Canada, under the Remote Predictive Mapping project of the Geo-mapping for Energy and Minerals program, Natural Resources Canada, has the mandate to produce up-to-date geoscience maps of Canada’s territory north of latitude 60°. Over the past three decades, the increased availability of space-borne sensors imaging the Earth’s surface using increasingly higher spatial and spectral resolutions has allowed geologic remote sensing to evolve from being primarily a qualitative discipline to a quantitative discipline based on the computer analysis of digital images.    Classification of remotely sensed data is a well-known and common image processing application that has been used since the early 1970s, concomitant with the launch of the first Landsat (ERTS) earth observational satellite. In this study, supervised classification is employed using a new algorithm known as the Robust Classification Method (RCM), as well as a Random Forest (RF) classifier, to a variety of remotely sensed data including Landsat-7, Landsat-8, Spot-5, Aster and airborne magnetic imagery, producing predictions (classifications) of bedrock lithology and Quaternary cover in central Victoria Island, Northwest Territories. The different data types are compared and contrasted to evaluate how well they classify various lithotypes and surficial materials; these evaluations are validated by confusion analysis (confusion matrices) as well as by comparing the generalized classifications with the newly produced geology map of the study area. In addition, three new Multiple Classification System (MCS) methods are proposed that leverage the best characteristics of all remotely sensed data used for classification.     Both RCM (using the maximum likelihood classification algorithm, or MLC) and RF provide good classification results; however, RF provides the highest classification accuracy because it uses all 43 of the raw and derived bands from all remotely sensed data. The MCS classifications, based on the generalized training dataset, show the best agreement with the new geology map for the study area.SOMMAIREDans le cadre de son projet de Télécartographie prédictive du Programme de géocartographie de l’énergie et des minéraux de Ressources naturelles Canada, la Commission géologique du Canada a le mandat de produire des cartes géoscientifiques à jour du territoire du Canada au nord de la latitude 60°. Au cours des trois dernières décennies, le nombre croissant des détecteurs aérospatiaux aux résolutions spatiales et spectrales de plus en plus élevées a fait passer la télédétection géologique d’une discipline principalement qualitative à une discipline quantitative basée sur l'analyse informatique d’images numériques.     La classification des données de télédétection est une application commune et bien connue de traitement d'image qui est utilisée depuis le début des années 1970, parallèlement au lancement de Landsat (ERST) le premier satellite d'observation de la Terre. Dans le cas présent, nous avons employé une méthode de classification dirigée en ayant recours à un nouvel algorithme appelé Méthode de classification robuste (MRC), ainsi qu’au classificateur Random Forest (RF), appliqués à une variété de données de télédétection dont celles de Landsat-7, Landsat-8, Spot-5, Aster et d’imagerie magnétique aéroportée, pour produire des classifications prédictives de la lithologie du substratum rocheux et de la couverture Quaternaire du centre de l'île Victoria, dans les Territoires du Nord-Ouest. Les différents types de données sont comparés et contrastés pour évaluer dans quelle mesure ils classent les divers lithotypes et matériaux de surface; ces évaluations sont validés par analyse de matrices de confusion et par comparaison des classifications généralisées des nouvelles cartes géologiques de la zone d'étude. En outre, trois nouvelles  méthodes par système de classification multiple (MCS) sont proposées qui permettent d’exploiter les meilleures caractéristiques de toutes les données de télédétection utilisées pour la classification.     Tant la méthode MRC (utilisant l'algorithme de classification de vraisemblance maximale ou MLC que la méthode RF donne de bons résultats de classification; toutefois c’est la méthode RF qui offre la précision de classification la plus élevée car elle utilise toutes les 43 les bandes de données brutes et dérivées de toutes les données de télédétection. Les classifications MCS, basées sur le jeu de données généralisées d’apprentissage, montrent le meilleur accord avec la nouvelle carte géologique de la zone d'étude

Remote Predictive Mapping 3. Optical Remote Sensing – A Review for Remote Predictive Geological Mapping in Northern Canada

Optical remotely sensed data have broad application for geological mapping in Canada’s North. Diverse remote sensors and digital image processing techniques have specific mapping functions, as demonstrated by numerous examples and associated interpretations. Moderate resolution optical sensors are useful for discriminating rock types, whereas sensors that offer increased spectral resolution (i.e. hyperspectral sensors) allow the geologist to identify certain rock types (mainly different types of carbonates, Fe-bearing rocks, sulphates and hydroxyl-(clay-) bearing rocks) as opposed to merely discriminating between them. Increased spatial resolution and the ability to visualize the earth’s surface in stereo are now offered by a host of optical sensors. However, the usefulness of optical remote sensing for geological mapping is highly dependent on the geologic, surficial and biophysical environment, and bedrock predictive mapping is most successful in areas not obscured by thick drift and vegetation/lichen cover, which is typical of environments proximal to coasts. In general, predictive mapping of surficial materials has fewer restrictions. Optical imagery can be enhanced in a variety of ways and fused with other geo-science datasets to produce imagery that can be visually interpreted in a GIS environment. Computer processing techniques are useful for undertaking more quantitative analyses of imagery for mapping bedrock, surficial materials and geomorphic or glacial features. SOMMAIRE Les données recueillies par télédétection optique offrent beaucoup de possibilités pour la cartographie géologique des régions nordiques canadiennes. La diversité des télécapteurs et des techniques de traitement numérique des données permet la définition de fonctions de cartographie spécifique, tel que l’illustre de nombreux exemples et interprétations associées. Des capteurs optiques de moyenne résolution sont utiles pour différencier les types de roche, alors que les capteurs à plus fines résolutions (les capteurs hyperspectraux, par ex.) permettent au géologue de subdiviser certains types de roches (principalement différents types de carbonates, roches ferrugineuses, roches à sulfates et à hydroxyle (argile). Une meilleure résolution spatiale et la fonction de vision stéréoscopique sont maintenant offertes sur une gamme de capteurs optiques. Cela dit, l’utilité de la télédétection optique pour la cartographie géologique est fortement tributaire des conditions de la géologie de surface et de son environnement biophysique, le potentiel prédictif de la télécartographie étant maximal pour les régions exemptes d’une couverture épaisse de dépôts glaciaires ou d’une couverture végétale/lichen caractéristique typique des environnements longeant les côtes. Divers procédés permettent de rehausser l’imagerie optique et de réaliser des fusions avec d’autres jeux de données géoscientifiques et de produire une imagerie visuellement inter-prétable en environnement de SIG. Les techniques de traitement de données par ordinateur sont utiles pour d’autres types d’analyse quantitative d’imagerie pour la cartographie des matériaux de couverture du socle et pour répertorier des formes glaciaires et géomorphologiques

On the influence of virtual camber effect on airfoil polars for use in simulations of Darrieus wind turbines

Darrieus vertical-axis wind turbines are experiencing renewed interest from researchers and manufacturers, though their efficiencies still lag those of horizontal-axis wind turbines. A better understanding of their aerodynamics is required to improve on designs, for example through the development of more accurate low-order (e.g. blade element momentum) models. Many of these models neglect the impact of the curved paths that are followed by blades on their performance. It has been theorized that the curved streamlines of the flow impart a virtual camber and incidence on them, giving a performance analogous to a cambered blade in a rectilinear flow. To test the extent of this effect, wind tunnel experiments have been conducted in a rectilinear flow to obtain lift and drag for three airfoils: a NACA 0018 and two conformal transforms of the profile. The transformed airfoils exhibit the virtual camber that the theory predicts is imparted to a NACA 0018 when used in a Darrieus turbine with blade chord-to-turbine radius ratios, c/R, of 0.114 and 0.25. A parallel computational fluid dynamics campaign has been conducted to study the aerodynamic behavior of the same blades in curvilinear flow in Darrieus-like motion with c/R = 0.114 and 0.25, at tip-speed ratios of 2.1 and 3.1, using novel techniques to obtain blade effective angles of attack. The analysis confirms that the theory holds, with the wind tunnel results for the NACA 0018 being analogous to numerical results for the relevant cambered airfoils. In addition, turbine performance is calculated using computational fluid dynamics and a blade element momentum code, for each of the blades in turn. The computational fluid dynamics results for the NACA 0018 agree closely to blade element momentum results for the equivalent cambered airfoil where c/R = 0.25, for both turbine power and blade tangential forces. Agreement between the two methods using geometrically identical blades is poor at both the blade and turbine level for c/R = 0.25. It is concluded that when modeling a Darrieus rotor using blade element momentum methods, applying experimental data for the profile used in the turbine will yield inaccurate results if the c/R ratio is high, in such cases it is necessary to select a profile based on the virtual shape of the blades

Comment on ‘New palaeomagnetic result from Vendian red sediments in Cisbaikalia and the problem of the relationship of Siberia and Laurentia in the Vendian’ by S. A. Pisarevsky, R. A. Komissarova and A. N. Khramov

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/73333/1/j.0956-540x.2001.01474.x.pd

Environmental DNA captures elasmobranch diversity in a temperate marine ecosystem

Many sharks, skates, and rays (elasmobranchs) are highly threatened by the activities of commercial fisheries, and a clear understanding of their distributions, diversity, and abundance can guide protective measures. However, surveying and monitoring elasmobranch species can be highly invasive or resource-intensive, and utilization of non-invasive environmental DNA-based methods may overcome these problems. Here, we studied spatial and seasonal variation in the elasmobranch community of the Western English Channel using environmental DNA (eDNA) collected from surface and bottom waters periodically over an annual cycle (2017–2018). In total we recovered 13 elasmobranch species within eDNA samples, and the number of transformed eDNA reads was positively associated with species (hourly) catch data resolved from 105-year time series trawl data (1914–2018). These results demonstrate the ability of eDNA to detect and semi-quantitatively reflect the prevalence of historically dominant and rare elasmobranch species in this region. Notably, eDNA recorded a greater number of species per sampling event than a conventional trawl survey in the same area over the same sampling years (2017–2018). Several threatened species were recovered within the eDNA, including undulate ray, porbeagle shark, and thresher shark. Using eDNA, we found differences in elasmobranch communities among sampling stations and between seasons, but not between sampling depths. Collectively, our results suggest that non-invasive eDNA-based methods can be used to study the spatial and seasonal changes in the diversity and abundance of whole elasmobranch communities within temperate shelf habitats. Given the threatened status of many elasmobranchs in human-impacted marine environments, eDNA analysis is poised to provide key information on their diversity and distributions to inform conservation-focused monitoring and management

Sustainable development and African local government: can electronic training help build capacities?

A recent study carried out by European and African organizations into the potential for electronic distance training (EDT) on sustainability in African local governments concluded that EDT was both 'useful and feasible'. This article reflects on some of the theoretical and practical implications of that study. It focuses on the connection between learning and sustainability and how EDT programmes might be designed and promoted. The paper argues that, while resource issues and poor access to Information and Communication Technologies (ICTs) create considerable constraints and point to the need for policies to improve access, in general the most important factors for successful capacity building relate to the design of learning programmes that take account of the work contexts and skill and capability requirements of those targeted as learners. 'Useful' and 'feasible' depend on (i) how work-based and work-related learning processes are understood and (ii) the conditions to promote learning within African local government. Keywords: Africa; Electronic distance training; Local government; Sustainability; Workplace learnin

Trends in publications regarding evidence-practice gaps: A literature review

<p>Abstract</p> <p>Background</p> <p>Well-designed trials of strategies to improve adherence to clinical practice guidelines are needed to close persistent evidence-practice gaps. We studied how the number of these trials is changing with time, and to what extent physicians are participating in such trials.</p> <p>Methods</p> <p>This is a literature-based study of trends in evidence-practice gap publications over 10 years and participation of clinicians in intervention trials to narrow evidence-practice gaps. We chose nine evidence-based guidelines and identified relevant publications in the PubMed database from January 1998 to December 2007. We coded these publications by study type (intervention versus non-intervention studies). We further subdivided intervention studies into those for clinicians and those for patients. Data were analyzed to determine if observed trends were statistically significant.</p> <p>Results</p> <p>We identified 1,151 publications that discussed evidence-practice gaps in nine topic areas. There were 169 intervention studies that were designed to improve adherence to well-established clinical guidelines, averaging 1.9 studies per year per topic area. Twenty-eight publications (34%; 95% CI: 24% - 45%) reported interventions intended for clinicians or health systems that met Effective Practice and Organization of Care (EPOC) criteria for adequate design. The median consent rate of physicians asked to participate in these well-designed studies was 60% (95% CI, 25% to 69%).</p> <p>Conclusions</p> <p>We evaluated research publications for nine evidence-practice gaps, and identified small numbers of well-designed intervention trials and low rates of physician participation in these trials.</p